产品详情

深沟球轴承主要用于径向和径向载荷和轴向载荷。当深沟球轴承径向间隙较大时，具有角接触轴承的性能，能够承受较大的轴向载荷。它也具有一定的心理调节能力。深沟球轴承的摩擦系数很小，极限速度很高。

Deep groove ball bearings are mainly used for radial and radial loads and axial loads. When the radial clearance of deep groove ball bearing is large, it has the performance of angular contact bearing and can bear large axial load. It also has certain psychological adjustment ability. The friction coefficient of deep groove ball bearings is very small, and the limit speed is very high.

深沟球轴承除了基本类型外，泰州SKF轴承还有各种结构，如：带防尘盖的深沟球轴承；带橡胶密封圈的深沟球轴承；带止动槽的深沟球轴承；承载能力大的深沟球轴承。H型球槽口；双列深沟球轴承。

In addition to the basic types of deep groove ball bearings, Taizhou SKF bearings also have various structures, such as: deep groove ball bearings with dust cover; deep groove ball bearings with rubber sealing rings; deep groove ball bearings with stop grooves; deep groove ball bearings with large carrying caPACity. H ball notch; double row deep groove ball bearings.

高温深沟球轴承

High temperature deep groove ball bearing

在窑车、高炉或喷漆设备的传动系统中，轴承**须工作在极高温度下，或者**须承受很大的温差。普通轴承不适用。

In the transmission system of kiln car, blast furnace or paint spraying equipment, bearing ** must work at extremely high temperature, or ** must bear a large temperature difference. Ordinary bearings are not applicable.

高温轴承的设计主要通过优化泰州SKF轴承材料、结构、内部工艺尺寸和润滑条件来满足不同工况的要求。

The design of high temperature bearing mainly meets the requirements of different working conditions by optimizing the material, structure, internal process size and lubrication conditions of SKF bearing in Taizhou.

高温深沟球轴承具体分为五个不同系列：

High temperature deep groove ball bearings are specifically divided into five different series:

**高温轴承-高温石墨保持器深沟球轴承：它具有**高温无润滑的特点，适用于-50~500~C的温度环境。

High temperature bearing - high temperature graphite retainer deep groove ball bearing: It has the characteristics of ** high temperature without lubrication, and is suitable for temperature environment of - 50 ~ 500 ~ C.

石墨笼安装在轴承上。泰州SKF轴承及防尘罩表面涂覆**酸锰，具有防腐蚀效果，可提高操作性能。石墨笼将球分开，在旋转过程中释放的石墨颗粒为轴承提供足够的润滑。轴承装有两个防尘盖，以引导保持架在轴向方向，以防止固体污染物进入。这种轴承的另一个优点是其良好的环保性能。即使在**高温度，也不排放危险气体。（实例轴承代码方式：

The graphite cage is mounted on the bearing. Taizhou SKF bearing and dust-proof cover is coated with acid manganese, which has anti-corrosion effect and can improve operation performance. The graphite cage separates the ball, and the graphite particles released during the rotation provide enough lubrication for the bearing. The bearing is equipped with two dust shields to guide the cage in the axial direction to prevent solid contaminants from entering. Another advantage of this bearing is its good environmental protection performance. Even at high temperatures, no dangerous gas is emitted. (example bearing code way:

关于不对中

about misalignment

高温深沟球轴承由于内部间隙大，泰州SKF轴承能够承受外圈相对于内圈20-30弧度的角位移。这仅适用于轴承的缓慢旋转；在滚动条件下，上述不对准对轴承的使用有不利影响。

High temperature deep groove ball bearings have large internal clearance, so Taizhou SKF bearings can withstand the angular displacement of the outer ring relative to the inner ring of 20-30 radians. This is only applicable to the slow rotation of bearings; under rolling conditions, the misalignment mentioned above has adverse effects on the use of bearings.

高温轴承转速

High temperature bearing speed

高温轴承通常按公差制造，其间隙比普通轴承大得多，因此通常不适合高速运行。但是它可以运行在100转/分钟。

High temperature bearings are usually manufactured according to tolerance, and their clearance is much larger than that of ordinary bearings, so they are usually not suitable for high-speed operation. But it can run at 100 rpm.

高温轴承公差

High temperature bearing tolerances

高温深沟球泰州SKF轴承是按照一般公差制造的，符合国家标准。

High temperature deep groove ball Taizhou SKF bearings are manufactured according to general tolerances and conform to national standards.

然而，轴承公差可能与标准公差略有不同，这是由于为了防止腐蚀和提高操作性能，进行了特殊处理。上述偏差对安装或轴承的运行没有影响。

However, bearing tolerances may differ slightly from standard tolerances due to special treatment to prevent corrosion and improve operational performance. The above deviation has no effect on the operation of the installation or bearing.

轴承尺寸与载荷的关系

Relationship between bearing size and load

轴承的尺寸是决定轴承承受多少负荷的一个重要因素。

The size of the bearing is an important factor determining how much load the bearing will bear.

文章来自：泰州SKF轴承 www.wh-skf.com

The article is from: Taizhou SKF bearing www.wh-skf.com

文章来自：泰州INA轴承 www.ina-china.cn

The article is from: Taizhou INA bearing www.ina-china.cn

文章来自：泰州NSK轴承 www.klbbearings.com

The article is from: Taizhou NSK bearing www.klbbearings.com

QQ：524085168

电话：0510-81207777

手机：13311666672/13395185757